Beeps problem?

when i booth up my computer i get hold of no beeps, i own video.

if i try to format my drive it will start, until it get to window is

starting and it freeze there. I can also obtain to the bois, but no beeps, when i pinch out the memory i get beep. what could be the problem?

Beeps problem?

Here's a great site for checking on the meaning of toot codes, as well as BIOS errors:



http://bioscentral.com/



What strikes me as curious is that you don't get any beep unless you remove the memory. The only point I've been competent to find on no beeps is a power supply disappointment. Which could make sense; it could be failing as the frozen drive is trying to draw more power to spin up as well as read & write.



Next time you're inside the travel case, make sure that everything's seated properly, and that adjectives the connections are tight. Also, take a look at the power supply, as capably as the connectors leading bad from it to the different components. Good luck!
when you remove the memory it will beep continuously. This is to signify that in that is aproblem with your memory.



As far as window freezing, insert your windows cd and run the retrieval tool. this can help solve your problem. Worse satchel scenario, you may have to reinstall window.
YOU CAN FRY YOUR MOTHERBOARD IF YOU TAKE OUT YOUR MEMORY AND TURN POWER ON WITHOUT IT.

I HAVE REPLACED HUNDREDS OF MOTHERBOARDS BECAUSE PEOPLE KEEP DOING THIS. SOUNDS LIKE YOUR PROBLEM WAS WINDOWS OR HARD-DRIVE NOW MAYBE MOTHERBOARD TOO!!!

share hotel rental fee